What is the treatment method of micro spray aluminum cans after use? For the sake of safety, the following methods can only be used for micro spray aluminum cans containing harmless liquids, and for micro spraying of aluminum cans containing harmful substances such as agrochemical liquids, degumming agents, detergents, etc., and it is not allowed to be refilled, so let me tell you how to deal with the miniature spray aluminum cans after use!

First, by holding down the ejector button until we have no more substance coming out of the mouthpiece, pull out the nozzle to expose the tube underneath, press the valve firmly to communicate with the outside world, fill the syringe with air, cover the tubing with the top of the injector (seal if necessary), push the action piston, press the air into the canister, after pressing the appropriate air to make the pressure inside the canister be greatly affected, the back button chooses to continue improving the spray, repeat the exercise a few times, but until the working spray no longer smells of the original substance (if you are not too particular, this step can be skipped), and then the appropriate amount of the substance to be filled is pumped with this machine, pressed into the bottle according to the method described above, or the liquid can be sucked into it by drawing air from it, thus creating a vacuum inside.

After pouring the appropriate amount of liquid into it for study, continue to pump air into it with the loader until the spray treatment effect falls short of the desired target when the button is attached. The volume of the liquid should not exceed 2/3 of the total volume of the aerosol can, and should not exceed 1/2. Do not introduce toxic substances or corrosive liquids, because it is easy to cause the patient's liquid to splash in your own operation.

Because of its convenient use and wide application, micro spray aluminum cans are widely used in all walks of life and people's daily life. In recent years, especially in the cosmetics industry, it has begun to be widely used. I don't know if you have noticed that the cosmetic aerosols (sunscreen spray, moisturizing spray, ......etc.) on the market nowThe packaging is all micro spray aluminum cans instead of tinplate cans? Why?

1. The resistance of micro spray aluminum cans is better, we can know that the contents of the general aerosol are composed of material and gas system, which requires the sealing of the bottle to be very good, and the aluminum can just meets the requirements of this development, the aluminum can is stamped by an aluminum embryo, it has no seams compared with three or two tinplate cans, and the probability of corrosion of the liquid on the aluminum can is smaller.

2. The atomization effect of the miniature spray aluminum can is very better, we can know that the spray system is generally used in summer, sunscreen spray, post-sun repair spray, widely used, the atomization effect of the aluminum bottle is significantly higher than that of other related materials in the world, the spray will feel cool, the effect can be better, because the use of aerosol is sprayed by pressure in the can, the miniature spray aluminum can is an integrated can, the pressure resistance is higher than or the iron can, so that the atomization effect is good.