What is the treatment method for micro spray aluminum cans after use? For safety reasons, the following methods can only be used for miniature spray aluminum cans containing harmless liquids, aluminum cans used for micro spraying containing agrochemical liquids, degreasing agents, detergents and other hazardous substances are not allowed to refill, so let me tell you how to deal with the miniature spray aluminum cans after utilization!

　　First, by pressing and holding the spray button until we have no more substance shooting out of the mouthpiece, pulling out the mouthpiece to expose the tube underneath, pressing the valve hard to connect the can to the outside world, filling the syringe with air, covering the tube with the top of the injector (sealing it if necessary), pushing the action piston to press the air into the can, and after pressing the appropriate amount of air to make a greater impact on the pressure inside the can, the back button is selected to continue to improve the Spray, repeat the exercise several times, but until the working spray no longer has the odor of the original substance (you can skip this step if you are not too particular about it), and therewith extract the proper amount of the substance to be filled with the machine and press it into the bottle as described above, or you can also draw the liquid into it by drawing air from it, thus creating a vacuum in it.

　　After pouring the proper amount of liquid inside for the study, continue pumping air into it with the loader until the spray treatment effect can lack the desired target after loading the button. The volume of the liquid should not exceed 2/3 of the total volume of the spray can.It should not exceed 1/2.Do not introduce toxic substances or corrosive liquids, because it is easy to cause patients to splash liquids in their own operations.

　　So how about the recycling method of miniature spray aluminum cans? The following for you to introduce.

　　1. Crushing: The shape of the recycled micro spray aluminum cans has been damaged, and some imported waste micro spray aluminum cans have been packed into pieces, which need to be crushed to remove the paint layer.

　　2. Paint removal: loose waste micro chemical spray aluminum cans (including a broken waste micro smart spray aluminum cans) directly and economically into the paint stripping kiln for paint removal, at first, to supplement a certain amount of heat, after reaching a certain temperature, the heat is mainly dependent on the exothermic process of the carbonization of the surface coating of the micro spray aluminum cans. In the rotary paint stripping kiln, the paint layer of the micro spray aluminum cans is carbonized, and the paint layer comes off by its own vibration in the process of rotary movement, after that, it has to go through our own special vibration and equipment to make all the carbon particles come off, and the temperature of the rotary kiln is controlled at about 500 degrees.

　　3. Packaging: waste micro-chemical spraying aluminum cans are very thin, smelting process burn loss is large, some even reach more than 10%, in order to improve the recovery rate of aluminum smelting, the need to reduce the surface area of the waste it to reduce the burn loss, packaging equipment can be used in domestic hydraulic balers.

　　4. Melting: pre-treatment of miniature spray aluminum cans into the melting furnace for melting, cooling into a metal block, and then processed, more problems will occur in the fourth step of the process, just need to pay attention to the cooling of the aluminum block and then processed metal block.

　　The above is the miniature spray aluminum cans after the use of recycling methods, if you need to know more information, you can continue to learn, I hope it will help you.
 

　　微型喷雾铝罐使用后的处理方法是怎样的?为了安全起见，以下方法只能用于含有无害液体的微型喷雾铝罐，用于微量喷涂含有农化液体、脱胶剂、洗涤剂等有害物质的铝罐，是不允许再加注的，那么我来告诉你怎么处理利用后的微型喷雾铝罐!

　　首先，通过按住喷射按钮，直到我们没有更多的物质从口嘴中射出，拔出管口露出下面的管子，用力按压阀门，使罐子与外界连通，用空气填充注射器，注入器顶部盖住管道(必要时密封)，推动作用活塞，将空气压入罐中，在按下适当的空气使罐内压力受到较大影响后，后退按钮选择继续改善喷雾，重复几次练习，但直到工作喷雾不再有原来物质的气味(如果你不是太讲究，可以跳过这一步)，随之用该机器抽取适量的待装物质，按上述方法压入瓶子中，也可以通过从它吸入空气将液体吸入其中，从而在里面产生真空。

　　在里面倒入适量的液体进行研究后，继续用装载器向里面泵入空气，直到装上按钮后喷雾治疗效果能缺少理想的目标。液体的体积不应超过喷雾罐总体积的2/3.应该不要超过1/2.不要导入有毒物质或腐蚀性液体，因为在自己的操作中容易造成患者液体飞溅。

　　那么微型喷雾铝罐的回收方法如何?下面为你介绍。
 

　　1.粉碎：回收的微型喷雾铝罐外形已被破坏，部分进口废微喷铝罐已被包装成碎片，需要粉碎后才能去除漆层。

　　2.脱漆：松散的废弃微型化学喷涂铝罐(包括一个破碎的废弃微型智能喷涂铝罐)直接经济地进入脱漆窑进行脱漆，刚开始的时候，要补充一定的热能，达到一定温度后，热能主要依靠微喷铝罐表面涂层碳化的放热过程。在旋转脱漆窑中，微型喷雾铝罐的漆层碳化，在旋转运动过程中自身振动，漆层脱落，之后还要经过我们自己特殊的震动和设备，让所有的碳粒脱落，回转窑的温度控制在500度左右。

　　3.包装：废弃微化工喷涂铝罐很薄，冶炼过程中烧损较大，有的甚至达到10%以上，为了提高铝冶炼的回收率，需要减少废弃它的表面积，减少烧损，包装设备可采用国产液压打包机。

　　4.熔化：预处理后的微型喷雾铝罐进入熔炼炉进行熔炼，冷却成金属块，再加工，比较多问题会出现在第四步的过程里，只需要留意好铝块冷却后再加工金属块。

　　以上是微型喷雾铝罐用后的回收处理方法，如果您需要了解更多信息，可以继续学习，希望对你有帮助。